Having an injection molding background I saw many uses for parts pickers using many different sizes from 90 – to 3000 ton injection molding machines and a vast amount of part sizes and shapes that varied from items as small as dinner plates to as big as municipal refuse containers. I dealt mainly with non-porous applications but EXAIR offers both porous and non-porous E-vacs to accommodate wide range of part sizes and weights.
EXAIR has High Vacuum Generators for Non-Porous Applications with high vacuum units up to 27″ Hg (91 kPa) with vacuum flows up to 15.8 SCFM (447 SLPM). The plastic products I was moving were all non-porous, meaning air or liquids would not permeate into the surface of my product. Other examples of non-porous material including plastic sub-straights include glass, steel sheet, ceramics, vinyl, sealed tiles and varnished wood.
Porous applications use a low vacuum generator. Low vacuum units up to 21″Hg (71kPa) with flows up to 18.5 SCFM (524 SLPM) are typically used for porous materials such as corrugate, wood, fabrics, cinder block, etc… The relatively lower level vacuum for porous materials prevents warping, marring, dimpling or disfiguring of the surface due to excessive vacuum. This style generates more vacuum flow to overcome porosity and leakage while maintaining control over the object being handled.
Referencing the previously mentioned refuse container application, I performed the weight and movement analysis and determined that four of our model 900754 vacuum cups and two of our model 810006M Non-porous E-vacs would have been more than adequate to unload and lift my 95 gallon refuse container lids from the injection molding machine and move them to the hot stamp center. I recall the vacuum cup system we had in place back then, would frequently drop out and lose control over the product. This was not only a real process headache, but also made for a legitimate safety issue as well.
EXAIR E-vacs actually have other interesting uses. They have been used in applications for bag and package opening, label placement, vacuum forming, leak testing and many other applications.
EXAIR also has accessories to round out vacuum cup systems including vacuum cups themselves, mufflers, check valves, vacuum tubing and fittings. We would have interest to discuss your application. If you have questions regarding which E-vac style and size is proper for your project please contact any of our Application Engineers to help you with selection and design of your system.
Eric Kuhnash
Application Engineer
E-mail: EricKuhnash@exair.com
Twitter: Twitter: @EXAIR_EK