EXAIR offers a wide variety of Atomizing Spray Nozzles that can be used to coat, rinse or cool a surface. We manufacture (3) different types – Internal Mix, External Mix, and Siphon Fed – as well as 3 different sizes – 1/8″ NPT, 1/4″ NPT and 1/2″ NPT – all in 303ss construction, rated up to 400°F.
Today, I would like to focus on 2 specific Atomizing Nozzles – our No Drip Internal Mix Deflected Fan Nozzle and our Internal Mix 360° Hollow Circular Pattern Nozzle.
Clik here to view.
The No Drip Internal Mix Deflected Fan Atomizing Nozzle produces a flat fan of atomized liquid at a right angle to the nozzle’s orientation and is designed for use in pressured fed applications where the liquid doesn’t need to be controlled independently from the pressurized air. This nozzle is the perfect choice in processes where mounting space is limited like spraying solvent on conveyed parts inside a small chamber or coating the inside of an enclosure. The patented No Drip feature positively stops the liquid flow when the supply air pressure drops below 30 PSIG, eliminating the need for any additional valves or supply lines. This is especially beneficial in applications using expensive fluids or where drips can ruin a finished product. This nozzle is available with 1/4″ NPT inlets and flows as high as 6.9 gallons per hour.
Clik here to view.
Our Internal Mix 360° Hollow Circular Pattern Atomizing Nozzles produce a circular spray pattern, the ideal solution when trying to coat the inside of ductwork or where a broad mist of atomized liquid is necessary, like dust suppression or humidification. Available in 1/4″ NPT with flows as high as 14.7 GPH and spray diameters up to 53″ in diameter depending on air and liquid supply pressures. With the 1/2″ NPT, we can achieve up to 150 GPH with a spray diameter up to 156″. Our standard Atomizing Nozzles also feature an adjustment valve to provide control of the flow rate, making them easy to adapt to a specific requirement.
If you have an application requiring a fine mist of atomized liquid, please contact one of our application engineers and let us know how we can help in making the best product selection to fit your need.
Justin Nicholl
Application Engineer
justinnicholl@exair.com
@EXAIR_JN
